To ensure maintenance tasks and certification of aircraft during maintenance scheduled and unscheduled inputs are carried out to the highest possible standards of safety, quality and serviceability.
Ensure appropriate application of certification privileges in accordance with the limitations of Company Authorisations.
Job Outline : - To carry out aircraft maintenance / servicing tasks compliant to manufacturers & local safety procedures.
Ensure that the assigned zones / aircraft are maintained IAW the documentation issued by approved authorities ensuring compliance is maintained to the latest revisions.
This is applicable to all Technical Publications e.g. Aircraft documentation, Technical Notices, Quality Notices, Engineering Procedures Manual etc.
Staff must ensure their personal approval / licensing requirements are valid and applicable to aircraft types worked through close liaison with Quality Assurance / GCAA.
Audit process and procedures to ensure the highest level of maintenance is achieved with the resources available. Ensure prompt attendance to all allocated aircraft arrival / departures with the intent to maximize the opportunities during ground time and avoid operational delays / disruptions.
Determine that any tooling / equipment used is serviceable and appropriate for the task and should be able to understand and use specialized tooling where required.
Robbery procedures used as a method to reduce costs and ensure a right-first-time pocket of good practice is formulated to ensure costs are reduced by avoiding multiple attempts to rectify defects.
Ensure trouble shooting follows laid down procedures and all tools used to ensure that fault rectification is carried out in the most expedient and cost effective manner.
To ensure that effective and efficient use of ordering of spares / materials takes place and that as a result DBNUs are reduced to zero.
To carry out any component changes as is necessary as part of the troubleshooting process and as directed by immediate supervisor.
This will include the ability to obtain and understand AMM, IPC, or other Manufacturer / vendor documentation required to carry out the task.
Ensure that available resources are utilised fully to meet the business needs. - Ensure that all activities performed and personnel responsible for are closely monitored to ensure the best possible application of safety rules and regulations are applied ensuring full understanding and adherence to Company procedures.
Staff must highlight deficiencies / requirements (whether for aircraft or hangar use) through the effective use of reporting tools in support of the overall quality improvement process and actively participate in propagating and enhancing the Group safety culture.
Participate and promote in creating a safety culture in an effort to minimize accidents and highlight deficiencies / failures that can lead to such accidents.
Ensure all work locations are kept clean and excellent housekeeping conditions are maintained. To avoid FOD, will be vigilant in ensuring work areas (including the ramp), vehicles, stands, lockers and toolboxes are all kept clean.
Responsible of being fully conversant with airport safety regulations including, holding and maintaining an airport driving permit.
Should be fully conversant with airport manoeuvring area requirements and be able to fully comply. - Establish effective up-
down rapport with Manager, Senior Engineers and sub-ordinates to maintain a seamless flow of information to highlight / detect and address any scenarios / events that might be disruptive to the operation.
Ensure all relevant reports pertaining to issues of service delays, incidents and accidents, are completed in detail identifying all elements leading up to events.
This includes completion of the necessary documentation including all relevant information that will allow rectification of defects by concerned sections through short-
term maintenance planning. Additional reviews of all other activities / actions must be performed to allow process improvements to be implemented as necessary.
Deficiencies or inability to meet objectives / competencies must be highlighted during interim reviews and an agreed course of action implemented to improve / correct any issues identified.
Each to be effective in guiding / coaching / counselling junior staff assigned to their team, including National and Expat Trainees, ensuring action and development plans are in place to address any areas of concern.
Ensure all staff allocated to him / her and themselves efficiently clock on / clock off Job cards in the process of performing their usual duties.
Must be available to assume duties and responsibilities of shift manager / senior engineer shift whenever delegated by the section manager.
Required to undergo recurrent Human Factors Training, to comply with CAR 145 requirements every 2 years. Ensure that any training courses attended are turned into approvals as required within 3.
5 months from completion of attended course. Emirates Flight Training Academy (EFTA) : 1. The role will be directly contributing to the safety and airworthiness through certification of maintenance activity for the Academy's fleet of 27 aircraft.
Be available to be deployed anywhere throughout the EFTA operation including diversionary airfields to assist in the recovery of an AOG, and / or the aircraft / component manufacturers facilities to act as EFTA Representative.
2. Oversee the final assembly of Emirates Flight Training Academy new aircraft and assisting in the acceptance / delivery process.
Supervise any outsourced maintenance work and assisting in the acceptance / delivery process. Ensure that all academy's aircraft are checked as expected to protect the flight operations of EFTA from any safety violations.
National / Higher National Diploma (12+2 or equivalent) or Apprenticeship in Mechanical, Electronic, Avionics or Aeronautical Engineering or equivalent training with a reputable airline or an approved maintenance organisation.
Experience : 9+ years in aviation maintenance environment with at least 2 years certifying experience as a license holder.
Emirates Flight Training Academy (EFTA) : Must have UAE GCAA / ICAO Type II / EASA Part 66 licence rated in B1.1 and / or B1.
2 categories, and / or B2 category, in addition to company approvals. Rating on Embraer Phenom 100EV or / and Cirrus SR22 aircraft type desirable.
Knowledge / skills : Fully conversant with Air Legislation and legal matters that relate to the operation and maintenance of aircraft to international standards.
Safety Sensitive role - Yes We offer an attractive tax-free salary, paid in Dirhams, the local currency of the UAE. The Dirham is linked to the Special Drawing Right of the International Monetary Fund and it has been held constant against the US dollar since the end of 1980 at a mid-
rate of approximately US$1 Dh3.66. Besides generous travel benefits normally associated with an airline, this managerial role also has excellent leave and health care packages, accommodation, power and water paid for, along with transport benefits, life insurance and other employee benefits making the role attractive to high performers.
By viewing the 'Dubai Lifestyle' section in the careers website you can also consider the many benefits of Dubai as a location to live and work in.